Rob's Coil Status

To: tesla-at-grendel.objinc-dot-com, Esondrmn-at-aol-dot-com, KLINEDA-at-UNIVSCVM.CSD.SCAROLINA.EDU, QUANTUM-at-UNIVSCVM.CSD.SCAROLINA.EDU, WMEYER-at-scientia.up.ac.za, bhaley-at-shore-dot-net, brad.alheim-at-the-spa-dot-com, frerichs-at-zfe.siemens.de, froula-at-cig.mot-dot-com, haba-at-snakemail.hut.fi, scott-at-csustan.csustan.edu, stegmann-at-michelob.wustl.edu, wl-josh-tw-at-society-dot-com, wsbusr3-at-urc.tue.nl
Subject: Rob's Coil Status
From: coco-at-astroman-dot-com
Date: Thu, 15 Feb 1996 13:11:56 -0500
>Received: from borg.mindspring-dot-com (root-at-borg.mindspring-dot-com [204.180.128.14]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id KAA25570 for <tesla-at-grendel.objinc-dot-com>; Thu, 15 Feb 1996 10:11:32 -0700

Well, I have finally had a chance to get to work on my coil.

The Secoonday is complete:
876 turns of 22AWG on 8"PVC form
The OD oof the forrm ended closer to 8.50" with epoxy seal and all
Copper ground plate as per Richard's suggestion.
Top and bottom closed with 0.50" white plexi.
Sealed ith another layer of two part epoxy.
Looks good.

I have located my capacitors...
I have three Maxwell Lab rated:
0.010 uf
50kv
tested at 0.0106uf
Equiv. series ind.:0.02uh

I also have four 40kv doorknob caps for use in the filter section.

Power suppply:
15Kv, 60ma  times 2 for a total of 15kv -at- 120ma. (neon)

I am going to start on the primary on Sunday...

Robert DelBueno