[Prev][Next][Index][Thread]
Re: Welder replacement
-
To: tesla-at-grendel.objinc-dot-com
-
Subject: Re: Welder replacement
-
From: Scott Myers <scotty-at-wesnet-dot-com>
-
Date: Fri, 16 Feb 1996 11:15:20 -0500
-
>Received: from billboard.wesnet-dot-com (billboard.wesnet-dot-com [206.21.6.2]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id JAA07772 for <tesla-at-grendel.objinc-dot-com>; Fri, 16 Feb 1996 09:08:57 -0700
Hi Kevin,
> How would you determine what size welder to use with a particular sized xfmr?
A welder for use as an inductive ballast is chosen based upon it primary current rating.
If you require 40 Amps for your maximum current value, you need a welder that has that much
current capability in it's primary (240 VAC) winding. The current rating of the welder will be
on a tag on its case.
Scott Myers