Re: Primary support

Ed replied,

>After I got the primary form completed, it took about 5 hours to lay and
>tie the copper tubing in place.  I suspended a flat piece of plywood from
>the ceiling about three feet above the coil form.  I then set the coil of
>tubing on the platform and let the end drop down to the form.  Then I slid
>a 3/8" tubing bender over the loose end and started forming it into place.

THATs how you got such a beautiful primary. 2 weeks ago, just before I wound
my primary, I posted on USA-TESLA a question on how you did it. USA-TESLA
then went off line and I havent seen my post since.