Re: Winding Secondary


For plexiglass, you don't need to prepare it like you do for PVC.  One 
subscriber has used double sided tape to hold the coils for winding 
purposes, but I don't remember how they came out.


On Mon, 12 Aug 1996 SSNSanders-at-aol-dot-com wrote:

> As soon as the wire gets in Im going to wind a 10 inch section of # 26 Ga.
> magnet wire on a 3.5 inch OD piexiglass form. The walls of the tube are aprox
> 1/4 inch thick. What kind of prep would be the very best for the tube? Im
> going to build a coil by my BTC3 plans with a few modifications of my own to
> the cap mounting system and the spark gap config. Im starting by winding the
> secondary to get that out of the way and I dont want to start off wrong on
> the foundation. any help appreciated.    Stephen S.