Re: Second Generation 6"

Hello Glenn:

Sounds like you've got a good start on the changes to your 

> I make an extra cap out of acrylic and drill a countersunk 
>hole in the middle.  Then I trim and solder a brass
>flathead countersunk machine screw to the top wire.  Using 
>more epoxy (jeez, I love that stuff),  this gets glued on 
>top of the coil. 

I was trying to figure out the best way to mount the toroid 
without breaking into my sealed acrylic form--your 
description sounds like a pretty reasonable technique.  I 
guess I'll try it.  Thanks for the idea!