[Prev][Next][Index][Thread]

Re: Gluing Plastics

>>From MALCOLM-at-directorate.wnp.ac.nz Thu Apr 11 18:13 MDT 1996
>>Received: from rata.vuw.ac.nz (root-at-rata.vuw.ac.nz [130.195.2.11]) by
uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id RAA24596 for
<tesla-at-grendel.objinc-dot-com>; Thu, 11 Apr 1996 17:00:15 -0600
>From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz>
>To: tesla-at-grendel.objinc-dot-com
>Date:          Fri, 12 Apr 1996 10:59:54 +1200
>Subject:       Gluing Plastics
>
>Hi all,
>        Does anyone know what solvent can be used for gluing/welding 
>Lexan?
>
>Thanks,
>Malcolm
>
Malcom,
        I work in a large injection molding company. I talked with 
some of the people here and got quite a response. In fact, I got
3 Xerox'ed pages that deal specifically with the gluing and 
welding of Lexan!!! It is extremely informative and I was going
to type the pages here but Mavis Beacon and me never got along
to well :) There are many ways to glue and weld Lexan. If you
can give me a fax #, I will be more than happy to send you the
3 page info. I will be here today (4/12/96) until 1:15p.m.
Eastern time at (904)274-6111.

Bob Schumann

P.S. It even has graphical procedures of how to do it!!
 
=============================================================
==  If you understand, things are just as they are.        ==
==  If you do not understand, things are just as they are. ==
=============================================================