Re: status report etc.

> >I used plywood for the base and triangular forms.  On the plywood 
> triangles I put some plexiglass "combs" that hold the tubing.  I used a 
> drill press and set up a jig to allow me to use a 3/8" milling cutter to 
> drill C shaped notches in the edge of the plexiglass.  

I used my wood router with a round veining bit to get the same effect on 
my plexiglass wedges.  The copper tubing fits in perfectly!

Steven Roys (sroys-at-radiology.ab.umd.edu)