[Prev][Next][Index][Thread]
Re: Rotary gap
-
To: tesla-at-grendel.objinc-dot-com
-
Subject: Re: Rotary gap
-
From: "SROYS" <SROYS-at-radiology.ab.umd.edu>
-
Date: Wed, 23 Aug 1995 16:51:50 EDT
-
>Received: from ns-1.csn-dot-net (root-at-ns-1.csn-dot-net [199.117.27.21]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with SMTP id OAA19964 for <tesla-at-grendel.objinc-dot-com>; Wed, 23 Aug 1995 14:54:07 -0600
Ed wrote:
> Mark suggested that if I'm not going to increase the size of my rotary
> gap...
What are the dimensions of your wheel? What size motor are you
using (horsepower, max RPM)? If it's a variable speed DC motor, how
are you getting the DC (simple rectified AC, rectified and filtered, etc...).
I'm working on building a rotary gap and these are things that will help
me decide what to look for and what to do.
Steven Roys (sroys-at-radiology.ab.umd.edu)