|
At present we are stocking HV caps, CDE brand, .15 uF 2
kV for MMC Tesla coil cap construction.
For the SISG Tesla coil builders in the group I also stock the
following HV diodes for MOT and NST rectification for SISG and lifter power
supplies:
7 kV 550 mA HV diodes
9 kV 430 mA HV diodes
10 kV 1,000 mA HV diodes
I also stock some special fast recovery HV diodes for
experimenters building up power supplies using flyback xmfrs for lifters, soda
can crushers, etc.
10 kV 450 mA HV diodes
I have special 4,200 turn HV flybacks with a 14 turn
primary of #16 AWG. These were formerly used in a 3,800 turn configuration
with the old large Zenith color TV sets from the late 1960's. I had them
rewound in a 4,200 turn style to produce slightly more output voltage than the
Zenith flybacks.I furnish a MOSFET driver schematic with orders for these
flybacks. A very simple minimum parts configuration driver using a pair of
MOSFETS in push-pull circuit driving the flyback with 10-12 VDC at 3 Amps.
A tripler circuit gives up to 32 kV DC output to run electrostatic lifters
single ended to ground.
I have developed a nice schematic formerly used with x-ray
transformers, can be used also with any center-tapped transformer such as a NST,
to produce a nice single ended to ground HV DC output for lifters and other HV
devices requiring 30-100 kV DC.
For ordering info contact me directly off-list. No
charge for the schematics.
Dr. Resonance
|