Re: Lifter project. (fwd)

["High Voltage list" <hvlist-at-pupman-dot-com>]

Original poster: <sroys-at-poodle.pupman-dot-com>



---------- Forwarded message ----------
Date: Thu, 14 Oct 2004 10:24:20 -0500
From: Dr. Resonance <resonance-at-jvlnet-dot-com>
To: High Voltage list <hvlist-at-pupman-dot-com>
Subject: Re: Lifter project. (fwd)


We have very large flybacks in stock.  Coupled with a NEC tripler they will
provide 30-40 kV DC.  Flybacks are $25 and NEC triplers are around $20.
Beats hauling around a monitor.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913
----- Original Message ----- 
From: "High Voltage list" <hvlist-at-pupman-dot-com>
To: "hvlist" <hvlist-at-poodle.pupman-dot-com>
Sent: Wednesday, October 13, 2004 9:52 PM
Subject: Lifter project. (fwd)


> Original poster: <sroys-at-poodle.pupman-dot-com>
>
>
>
> ---------- Forwarded message ----------
> Date: Tue, 12 Oct 2004 23:52:14 -0500
> From: Adam Britt <Beans45601-at-gmail-dot-com>
> To: hvlist-at-pupman-dot-com
> Subject: Lifter project.
>
> Hello, My name is Adam, and for my senior science project, i am doing
> "What is the ratio between efficiency and area of the grounded plate
> of an ion lifter?". But, i have a couple of questions.
>
> I work at a childrens museum, and for a class, the kids take appart
> computer monitors, so i have a lot at my disposal. But, i don't want
> to have to carry the monitor around with me, so, if i disconnect all
> the wires from the main circuit board, with the flyback, except for
> the ac in, and the HV out, will it still work, or does it need to be
> hooked up to the crt and all that good stuff to work? Also, what is
> the usual output of a computer monitor, and is the actual voltage ever
> printed inside the case? One more question, if i hook up a couple of
> the flybacks together, will this just destroy them all real quick, or
> should i do this to get more amps, out.
>
> Thank you for everything.
> -Adam
> KD5WIT
>
>
>