Re: Lifter project. (fwd)

["High Voltage list" <hvlist-at-pupman-dot-com>]

Original poster: <sroys-at-poodle.pupman-dot-com>



---------- Forwarded message ----------
Date: Thu, 14 Oct 2004 12:08:03 -0400
From: humanb-at-chaoticuniverse-dot-com
To: High Voltage list <hvlist-at-pupman-dot-com>
Subject: Re: Lifter project. (fwd)

DC, what are the ratings on your NEC triplers?

Thanks,

David Trimmell

On Thu, 14 Oct 2004 09:57:44 -0600 (MDT)
  "High Voltage list" <hvlist-at-pupman-dot-com> wrote:
> Original poster: <sroys-at-poodle.pupman-dot-com>
> 
> 
> 
> ---------- Forwarded message ----------
> Date: Thu, 14 Oct 2004 10:24:20 -0500
>From: Dr. Resonance <resonance-at-jvlnet-dot-com>
> To: High Voltage list <hvlist-at-pupman-dot-com>
> Subject: Re: Lifter project. (fwd)
> 
> 
> We have very large flybacks in stock.  Coupled with a 
>NEC tripler they will
> provide 30-40 kV DC.  Flybacks are $25 and NEC triplers 
>are around $20.
> Beats hauling around a monitor.
> 
> Dr. Resonance
> 
> Resonance Research Corporation
> E11870 Shadylane Rd.
> Baraboo   WI   53913
> ----- Original Message ----- 
>From: "High Voltage list" <hvlist-at-pupman-dot-com>
> To: "hvlist" <hvlist-at-poodle.pupman-dot-com>
> Sent: Wednesday, October 13, 2004 9:52 PM
> Subject: Lifter project. (fwd)
> 
> 
>> Original poster: <sroys-at-poodle.pupman-dot-com>
>>
>>
>>
>> ---------- Forwarded message ----------
>> Date: Tue, 12 Oct 2004 23:52:14 -0500
>> From: Adam Britt <Beans45601-at-gmail-dot-com>
>> To: hvlist-at-pupman-dot-com
>> Subject: Lifter project.
>>
>> Hello, My name is Adam, and for my senior science 
>>project, i am doing
>> "What is the ratio between efficiency and area of the 
>>grounded plate
>> of an ion lifter?". But, i have a couple of questions.
>>
>> I work at a childrens museum, and for a class, the kids 
>>take appart
>> computer monitors, so i have a lot at my disposal. But, 
>>i don't want
>> to have to carry the monitor around with me, so, if i 
>>disconnect all
>> the wires from the main circuit board, with the flyback, 
>>except for
>> the ac in, and the HV out, will it still work, or does 
>>it need to be
>> hooked up to the crt and all that good stuff to work? 
>>Also, what is
>> the usual output of a computer monitor, and is the 
>>actual voltage ever
>> printed inside the case? One more question, if i hook up 
>>a couple of
>> the flybacks together, will this just destroy them all 
>>real quick, or
>> should i do this to get more amps, out.
>>
>> Thank you for everything.
>> -Adam
>> KD5WIT
>>
>>
>>
> 
>