Re: 04 Gluing acrylic (fwd)

[Steven Roys <sroys@xxxxxxxx>]

---------- Forwarded message ----------
Date: Thu, 11 Sep 2003 10:44:11 -0700 (PDT)
From: humanb@xxxxxxxxxxxxxxxxxxx
To: hvlist@xxxxxxxxxx
Subject: Re: 04 Gluing acrylic (fwd)

Another solvent that may be easer to get is
Dichloromethane. Works very well with acrylic. Use good
ventilation.

David Trimmell

On Thu, 11 Sep 2003 11:18:06 -0600 (MDT), "High Voltage
list" wrote:

>
> Original poster: Steven Roys <sroys@xxxxxxxx>
>
>
>
> ---------- Forwarded message ----------
> Date: Thu, 11 Sep 2003 10:45:34 -0500
> From: Ralph Zekelman <hyperion@xxxxxxxxxxxxxx>
> To: High Voltage list <hvlist@xxxxxxxxxx>
> Subject: Re: 04 Gluing acrylic (fwd)
>
>
> > Subject: 04 Gluing acrylic
> >
> > > > I am searching for a good method of gluing a
> stack of two or
> three
> > > > acrylic disks, to make an electrostatic machine
> with embedded
> sectors
> > > > in the disks.
>
> I use chloroform (CHCl3) applied to the edges to be
> cemented. Apply with a hypodermic syringe. Produces
> strong, clear joints.
>
> Ralph Zekelman