Re: Voltage Tripler Question (fwd)

[Steven Roys <sroys@xxxxxxxx>]

---------- Forwarded message ----------
Date: Sat, 06 Sep 2003 11:38:30 -0700
From: Daniel Reinders <danreind@xxxxxxx>
To: High Voltage list <hvlist@xxxxxxxxxx>
Subject: Re: Voltage Tripler Question (fwd)

Thanks!  It's for a flyback transformer, so the low output is fine.

Cheers,

Dan
> ---------- Forwarded message ----------
> Date: Fri, 5 Sep 2003 09:53:23 -0500
> From: Dr. Resonance <resonance@xxxxxxxxxx>
> To: High Voltage list <hvlist@xxxxxxxxxx>
> Subject: Re: Voltage Tripler Question (fwd)
>
>
> C for "control" and F for "focus".  These pins can be ignored and cut off.
>
> There should be a ground and the other two are input and ouput.   Hook up
to
> a 120 V variac.  If you get the input and output reversed you will have no
> 360 VDC output.  It will block so you can not hurt it.
>
> Use caution in your final application as most of these rated 1 mA output
> current.
>
> Dr. Resonance
>
> Resonance Research Corporation
> E11870 Shadylane Rd.
> Baraboo   WI   53913