Re: Hi Voltage Resistor availability Aust/NZ (fwd)

[Steven Roys <sroys@xxxxxxxx>]

---------- Forwarded message ----------
Date: Thu, 04 Sep 2003 10:15:41 +0100
From: Mike Harrison <mike@xxxxxxxxxxxxxxx>
To: High Voltage list <hvlist@xxxxxxxxxx>
Subject: Re: Hi Voltage Resistor availability Aust/NZ (fwd)

On Wed, 3 Sep 2003 20:38:15 -0600 (MDT), you wrote:

>Original poster: Steven Roys <sroys@xxxxxxxx>
>
>
>
>---------- Forwarded message ----------
>Date: Wed, 03 Sep 2003 11:26:06 -0400
>From: "Mccauley, Daniel H" <daniel.h.mccauley@xxxxxxxx>
>To: High Voltage list <hvlist@xxxxxxxxxx>
>Subject: RE: Hi Voltage Resistor availability Aust/NZ (fwd)
>
>
>
>You don't need such a resistor if you are using them between stages.  I
>use 1Meg, 600V, 3W carbon resistors with zero problems and I'm charging
>my stages up to 40kV each.
>Unless your charging current is super higher, you will never drop more
>than a few hundred volts between each stage.

But they will see the full stage voltage when the marx discharges, and I would imagine a 600V
resistor run at 40KV may well deteriorate over time.

>Dan
>
>
>> Hi Steve
>>
>> Looking for 100k ohm 1watt 10kv for Marx
>> Tnx
>> Ted L
>> ----- Original Message -----
>> From: "High Voltage list" <hvlist@xxxxxxxxxx>
>> To: <hvlist@xxxxxxxxxx>
>> Sent: Wednesday, September 03, 2003 8:16 AM
>> Subject: Re: Hi Voltage Resistor availability Aust/NZ (fwd)
>>
>>
>> > Original poster: Steven Roys <sroys@xxxxxxxx>
>> >
>> >
>> >
>> > ---------- Forwarded message ----------
>> > Date: Tue, 02 Sep 2003 14:49:43 +0100
>> > From: Mike Harrison <mike@xxxxxxxxxxxxxxx>
>> > To: High Voltage list <hvlist@xxxxxxxxxx>
>> > Subject: Re: Hi Voltage Resistor availability Aust/NZ (fwd)
>> >
>> > On Tue, 2 Sep 2003 08:20:02 -0600 (MDT), you wrote:
>> >
>> > >Original poster: Steven Roys <sroys@xxxxxxxx>
>> > >
>> > >
>> > >
>> > >---------- Forwarded message ----------
>> > >Date: Tue, 2 Sep 2003 21:28:32 +1200
>> > >From: tesla <tesla@xxxxxxxxxxxxxxx>
>> > >To: High Voltage list <hvlist@xxxxxxxxxx>
>> > >Subject: Hi Voltage Resistor availability Aust/NZ
>> > >
>> > >Team
>> > >
>> > >Anybody out there know of a source of hi voltage resistors
>> in Aussie / NZ
>> in the 100 off quantity range
>> > >
>> > >tnx
>> > >Ted Linney
>> >
>> > What voltage/power  rating ?
>> >
>> >
>> >
>> >
>>
>>
>>
>