RE: Hi Voltage Resistor availability Aust/NZ (fwd)

[Steven Roys <sroys@xxxxxxxx>]

---------- Forwarded message ----------
Date: Wed, 03 Sep 2003 11:26:06 -0400
From: "Mccauley, Daniel H" <daniel.h.mccauley@xxxxxxxx>
To: High Voltage list <hvlist@xxxxxxxxxx>
Subject: RE: Hi Voltage Resistor availability Aust/NZ (fwd)



You don't need such a resistor if you are using them between stages.  I
use 1Meg, 600V, 3W carbon resistors with zero problems and I'm charging
my stages up to 40kV each.
Unless your charging current is super higher, you will never drop more
than a few hundred volts between each stage.

Dan


> Hi Steve
>
> Looking for 100k ohm 1watt 10kv for Marx
> Tnx
> Ted L
> ----- Original Message -----
> From: "High Voltage list" <hvlist@xxxxxxxxxx>
> To: <hvlist@xxxxxxxxxx>
> Sent: Wednesday, September 03, 2003 8:16 AM
> Subject: Re: Hi Voltage Resistor availability Aust/NZ (fwd)
>
>
> > Original poster: Steven Roys <sroys@xxxxxxxx>
> >
> >
> >
> > ---------- Forwarded message ----------
> > Date: Tue, 02 Sep 2003 14:49:43 +0100
> > From: Mike Harrison <mike@xxxxxxxxxxxxxxx>
> > To: High Voltage list <hvlist@xxxxxxxxxx>
> > Subject: Re: Hi Voltage Resistor availability Aust/NZ (fwd)
> >
> > On Tue, 2 Sep 2003 08:20:02 -0600 (MDT), you wrote:
> >
> > >Original poster: Steven Roys <sroys@xxxxxxxx>
> > >
> > >
> > >
> > >---------- Forwarded message ----------
> > >Date: Tue, 2 Sep 2003 21:28:32 +1200
> > >From: tesla <tesla@xxxxxxxxxxxxxxx>
> > >To: High Voltage list <hvlist@xxxxxxxxxx>
> > >Subject: Hi Voltage Resistor availability Aust/NZ
> > >
> > >Team
> > >
> > >Anybody out there know of a source of hi voltage resistors
> in Aussie / NZ
> in the 100 off quantity range
> > >
> > >tnx
> > >Ted Linney
> >
> > What voltage/power  rating ?
> >
> >
> >
> >
>
>
>