[Home][2016 Index] Re: [TCML] Ring topload [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Ring topload



Em 06/02/2016 15:57, wt5y escreveu:
Question on construction of ring toploads.  The tubing is supported by some sort of plastic insulators.  So each individual ring of tubing does not need to touch each other?  But what does the top of the secondary coil connect too?  Do the supporting crossbars just connect to the middle ring?


All the rings are interconnected in some way. But it would be interesting to see what happens if they are insulated, with just one connected to the secondary coil. Lots of internal sparks expected.

Antonio Carlos M. de Queiroz


---
Este email foi escaneado pelo Avast antivírus.
https://www.avast.com/antivirus

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla