I would go with the smaller primary cap and more primary turns. 3.4nF
already sounds like a large C in my experience anyway, maybe you can go
smaller still?
Steve
On Thu, Feb 12, 2015 at 9:36 AM, andrea ferrari <ferro1388@xxxxxxxxx> wrote:
> Hi Matt D, Hi list!
> Thanks for this kindly reply,,,,,
>
> Ok it's quite clear ;)
> I would like make a VTTC with RK715 (with an half-wave MOT doubler ), so my
> coil res is about 350 kHz (with a small topload and measured with simulated
> streamers)
> and I am thinking to try two different configurations:
> - primary cap 6.8 nF (12 kV) with something like 10 turns ( with few extra
> turns to adjust)
> - primary cap 3.4 nF (24 kV) with more than 10 turns on primary winding (I
> suppose 15+)
> In your opinion what may be the "best" choice???
> Thanks
> Andrea
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla