[Home][2014 Index] Re: [TCML] Tips for creating Supports for a flat spiral primary coil [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Tips for creating Supports for a flat spiral primary coil



For insulating purposes, try printing with a relatively low percent fill
and then vacuum impregnate the thing with wax or epoxy. Kind of like free
standing fiberglass mat.

- Jason


On Tue, Feb 25, 2014 at 7:36 AM, <jhowson4@xxxxxxxxxxx> wrote:

> We just printed a 1/4" thick box to protect a transmitter at work,
>
> With a 1.5" sphere electrode, it failed at42 kv on a face, and 37Kv on a
> corner.
> And once it failed it was pretty much worthless
>
>
>
> Thanks,
> John "Jay" Howson IV
>
>
> "Why thank you, I will be happy to take those electrons off your hands."
>
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla