[Home][2014 Index] Re: [TCML] NST model [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] NST model



Agree.

Ed

Ronald Reeland wrote:

Carl and Jim: Recheck your math computations. I believe the Transformer impedance is 500,000 ohms or .5 meg-ohms. Then the inductance is 1326 henrys or 1.326 kilo-henry.

Ron

From: cn8@xxxxxxx
To: tesla@xxxxxxxxxx
Date: Sun, 2 Feb 2014 13:43:20 -0700
Subject: Re: [TCML] NST model

That's a big honkin' inductance, but it makes sense.  I'll try it.

Thanks---

Carl





-----Original Message----- From: Jim Lux Sent: Saturday, February 01, 2014 2:24 PM To: Tesla Coil Mailing List Subject: [TCML] NST model The shunt results in large leakage inductance. Model it as a very large inductor in series with the secondary.

For instance, if you have a 15kV, 30mA transformer, that implies that the series impedance of the secondary is 15E3/30E-3 or 5 Megohms. Using X = L *2*pi*f At 60 Hz, that's 13kHenry
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla