[Home][2014 Index] Re: [TCML] Thought on top load connection [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Thought on top load connection



That is what I did.
(I cut out the parts of your reasoning that I did not consider)

On 12/12/2014 07:53 AM, David wrote:
I would like to raise the height of my toroid approx 6 or 9 or 12 inches or so above the secondary to provide better standoff from the primary.

winding a very wide spaced coil ,say 1/4 to 1/2 inch space wound for the length needed to place on top of the secondary. The thinking being that this would raise the height of the toroid as needed,

Basicly this would be a glorified helical connection to a raised top load. This "connection coil" would be the same diameter as the secondary (7 inches diameter).

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla