[Home][2014 Index] [TCML] secondary tube wall thickness [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] secondary tube wall thickness



I have a nice long piece of turquoise pvc pipe. It's almost 7" in
diameter, but the wall thickness is pretty thick at 10mm or a bit over
3/8ths. Will the rf losses make this a dud for winding on a secondary?
And is pvc an undesirable material to begin with? Thanks in advance for
your help!
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla