[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Treating RF feedback



Good news everyone! I've finally managed to avoid interfering with any
other appliances this time around! I'm almost positive that there was EMI
getting absorbed into the excess extension cord for the blower that was
left near the coil. That, or I had neglected to elevate the power cables
away from the counterpoise. Either way, I won't be making either of those
mistakes ever again, and hopefully there won't be any more mistakes to
correct here on out.

On an unrelated note, shouldn't I be expecting a bit more than a 15.5" arc
to a strike rod running a 15/30?

Thanks for the support as always,
Brandon H.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla