[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] Primary/Sec. Frequency



Tim,
You want the primary frequency a little under the secondary frequency, maybe
3 to 4 % on a small coil. The reason is the streamers on the toroid have
capacitance and when the streamers form, they drop the secondary frequency
down a little bit. So by tuning the primary low to start with, they should
hopefully end up both about the same.

Regards
Phil Tuck

www.hvtesla.com

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Tim Flood
Sent: 17 June 2013 18:54
To: tesla@xxxxxxxxxx
Subject: [TCML] Primary/Sec. Frequency

Is there a proper relationship between the primary output frequency and the
secondary output frequency? I did check the archives, with no luck.

Thank you.

Tim
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla