[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] srsg to vari speed rsg



One thing you could do, is rig a system to do sync that has multiple
dis-connectable electrodes for 120/240/480 BPS, but again, if you aren't
changing the tank cap size, only one range will actually serve your
purposes well...  What type of transformer are you using?  How is it
ballasted if at all?


On Sat, Jul 27, 2013 at 12:22 PM, <coils@xxxxxxxxx> wrote:

>
> Thanks David and Scott,
>
> that was very helpful.  My motive for wanting to make an asrg is really
> just to play with and use in future coils, and I have a chronic
> need to make something, usually coil related.  My current coil has a large
> tank cap of .076uF.  So, as Scott pointed out, a high break rate may be
> disappointing in my coil.  I was visualizing the proposed gap while laying
> in bed one night, and wondered there is a sync variable speed  solution.
> It sounds like its unnecessary though, so I think I will just scrounge up
> a motor and proceed from there.
>
>
>
> On Fri 26/07/13  1:47 PM , Scott Bogard <sdbogard@xxxxxxxxx> wrote:
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla