[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] high voltage fuses



Jim

In general, this is a dangerous design direction.  Fuses are designed
for a maximum voltage service.  If you ran 3 of these devices theoretically
at 6kV, how do you guarantee that you won't exceed their individual ratings?

If you exceed a fuse's voltage rating, it may not clear the circuit
under a fault condition.  A sustaining arc through a fuse could cause
a device to explode or maintain power on a circuit with a fault.  Bad idea...

On Tue, Jan 15, 2013 at 6:31 PM,  <HomerLea@xxxxxxx> wrote:
> I have a ton of 2,000 volt 5 amp fuses. Will they work for higher voltage
> if I put them in series?
> Jim Heagy
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla



-- 
Dave Sharpe, TCBOR/HEAS
Chesterfield, VA USA

Sharpe's Axiom of Murphy's Law
"Physics trumps opinion!"
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla