[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Varnish for SSTC secondary

Oops. I take it back. There are 2 materials there. http://www.flickr.com/photos/iceowl/6054095737/in/photostream/
The red stuff in this picture is the glass sheet (G10, G9, I don't remember which....) you need to cut that with a tile saw and carbide drill bits.
The white stuff is plain old simple LDPE cutting board material. Very very easy to cut with just about any implement you can imagine. 




On 2/1/2013 1:41 PM, david baehr wrote:

Hi,
        Great looking coils. May I ask what you spaced your banded primary with ?
Thanks,dave 
Date: Fri, 1 Feb 2013 08:31:11 -0800
From: joe@xxxxxxxxxxxxxx
To: tesla@xxxxxxxxxx
Subject: Re: [TCML] Varnish for SSTC secondary

Pics of my coil winding process available here:
<http://www.flickr.com/photos/iceowl/5995053288/in/photostream>

Cheers,
Joe

  		 	   		  _______________________________________________

Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla