[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Isolating Transformer



Michael,

When we do professional gigs we try and always use an isolation transformer and when we can we configure it as a 2:1 step down transformer (ie 480vac to 240vac). 

2a isn't much power. That's only 480w. I wouldn't be too concerned at this power level but better safe than sorry.

BrianB

On Apr 12, 2013, at 5:11 AM, Michael Gray <graymp89@xxxxxxxxx> wrote:

> I just remembered that I have an old 1:1 isolating transformer, which may
> be of use for my TC. It's a chunky and heavy unit so it's gotta be a
> traditional transformer. Have these units been used before in TCs? I have
> already purchased a mains line filter, so I would probably have the line
> filter across the mains socket, followed by this isolating transformer to
> add further protection. The specs of it are:
> 
> 750VA
> 50Hz
> 240V primary, 240V secondary
> 3A secondary
> Single phase
> VEC. GRP. 71 (not sure what this is)
> 
> (My NST is likely to draw around 2A - although haven't finished it yet so
> can't be sure)
> 
> What do we think about this?
> 
> http://imageshack.us/photo/my-images/854/img20130412125019.jpg/
> http://imageshack.us/photo/my-images/856/img20130412124642.jpg/
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla