[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Secondary Coil Form



On 09/12/2012 09:20 AM, Mark wrote:
The black PVC I got from Home Depot was fine.

My last coil was a 4.5" job made from the solid ABS (not the foam core stuff they have now), and it worked fine. I only mention that it was solid as a reference point, not to comment either way on the foam core type.

My current coil (6") is wound on the thinwall white PVC (ASTM D2729), and it also works fine.

Jon

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla