[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] EMI/RFI Filters for Dummies



Would I reverse the filter to protect a circuit in my control pannel that
is driving the ON/OFF relay?

On Sun, Oct 28, 2012 at 1:29 PM, Matthew Edwards <
matthew.n.edwards@xxxxxxxxx> wrote:

> Unplug the TV. Then you are safe.
> I was told to connect as below.
>
> Line-filter-variac-NST-terry filter-coil.
>
> Wire the filter correctly (not backwards).
> And, keep the filter close to the wall outlet.
>
> Hope that helps.
>
>
> Matthew Edwards
>
> On Oct 26, 2012, at 6:12 PM, "kkociolek8577" <kkociolek8577@xxxxxxxxxx>
> wrote:
>
> > Fellow Coilers,
> >
> > I’ve poured through the archives and came up more confused then when I
> started. Can someone help me understand?
> > 1) emi filter before or after the variac? (or both)
> > 2) line or load towards the mains before the variac? and/or
> > 3) line or load towards the nst after the variac?
> > I’m using a Terry filter; just don’t know which direction to go with the
> EMI filter. My goal is to not fry my 60” HDTV.
> >
> > Thank you,
> > Ken K
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>



-- 
*Don't lower your expectations, raise the voltage !*
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla