Re: [TCML] litz wire

[Tyler <tyler.c.c@xxxxxxxxx>]

If you put wire strands into a drill, you can get a nearly flawless
twisting of the wires. I do this all the time even for twisted pairs.

On Mon, Jul 2, 2012 at 10:35 AM, Jim Lux <jimlux@xxxxxxxxxxxxx> wrote:
> Starting a new thread here..
>
>
> How you wind litz wire without braiding.  one way is to twist clumps that
> are themselves twisted.  Consider taking 4 wires and twisting them.  Then
> take 4 clumps and twist those.  Each wire will spend the same distance on
> the outside of the clump.
>
> It gets tricky, though.. if you use 6 or 7 wires, then one inevitably winds
> up in the middle and stays there, so you an use a core to wrap around.  Or,
> stick with quads.
>
> The problem is, I think, that you can't continue this strategy.  That is,
> the 4 of 4 scheme can't be extended, can it?
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla