[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] secondary coil form



David,
I saw Cameron has three videos of his coil, but two of them say it is running as SRSG, whilst the other is labelled, and behaves more like, ARSG. He doesn't alter the motor speed though, so hard to really tell.
Are the SRSG labels  a typo, or is the coil setup such that he can quickly change motors, and cap values easily as a comparison?
(I appreciate you personally may not know the answer - so apologies in advance if so)

Regards Philip Tuck
www.hvtesla.com.

.


-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of drieben
Sent: 13 February 2012 02:13
To: Tesla Coil Mailing List
Subject: Re: [TCML] secondary coil form

Carl,

I went to a local plastic supply company and asked for PVC "duct" pipe, of the 12" diameter variety. It is made for low pressure air duct ser- vice and has thin (~1/8" thick) walls. They had a 10 ft. piece of it and since at the time another fellow coiler was in town visiting me, we went in together to purchase it and then cut it in half so we would each have a 5 ft. long piece. Yeah, the large diameter PVC is a bit pricey (IIRC, around
$5 to $6 / ft, back around '03, I believe). Both peices are still going strong in their respective coils to this day, though (Green Monster is mine and the other is in Cameron Prince's big SG coil).
http://www.youtube.com/watch?v=t23mGSW2k6c
http://www.youtube.com/watch?v=KRAgO2Xn-t8&feature=related

David Rieben


----- Original Message -----
From: "Carl Noggle" <cn@xxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Sunday, February 12, 2012 12:59 PM
Subject: [TCML] secondary coil form


> Hey--
> 
> What does everybody use for a form for winding a secondary?  My 
> secondary was (note the past tense) wound on a cardboard tube as a 
> temporary measure, and as such things go, it has lasted for 20 years.  
> However, an errant spark traveled between the wire and the cardboard in 
> the little triangular air space between the end of the last paper turn 
> and the wire, and that was the end of a long and illustrious career.
> 
> The coil was 12 inches in diameter and 30 inches long, and I would like 
> to wind one about 10 to 12 inches dia by 36 inches long.  The obvious 
> choice is PVC pipe.  What is everybody's experience with PVC, and is 
> there something better in a reasonable price range?
> 
> Thanks much for the help.
> 
> ---Carl
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla