RE: [TCML] spark gap close-up request

["Reverend Fuzzy" <pastor@xxxxxxxxxxxxxxxxx>]

If you look at the close-up of the gap (figure "C"), you'll see a crudely cut rectangular hole behind it.. that's the output of the
fan... the fan has a 90 degree diverter on its output, so the whole output of the fan blasts through this hole, directly onto the
gap at what feels like about 150 to 200 CFM.

> -----Original Message-----
> From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of Gary Lau
> Sent: July 08, 2011 10:36 AM
> To: Tesla Coil Mailing List
> Subject: Re: [TCML] spark gap close-up request
> 
> The reason I requested additional documentation was that I was unable to
> understand the relationship between the blower assembly, and the spark gap
> arc channel.  Your .pdf shows both components, seperately, but still not
> their relationship to each other.

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla