[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] SRSG question



On Tue, 16 Nov 2010 22:41:53 +0100, Gary Lau <glau1024@xxxxxxxxx> wrote:

When using Line-Sync on the scope, that works fine for verifying that the
motor is running synchronously, but it offers no guidance as to where the
phase should be set for optimal operation.

Regards, Gary Lau
MA, USA


Yes and no.

Pulling a sync signal from the SRSG with a scope is very usefull, provided that the right timing position has been determined by simulating the primary circuit in a cad package like Microsim. I used to do this ages ago, when I worked out how to deliver 300 equal sized bangs into the Museum coil. :-)

Cheers, Finn Hammer
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla