[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] JM Labs SSTC



Sam Barros may have a controller he no longer needs for the same unit. Drop
him and e-mail, www.powerlabs.org.

Aron

On Fri, Oct 29, 2010 at 10:27 PM, Bob Arenella <rja12@xxxxxxxxxxx> wrote:

> Hello all,
>               Picked up a SSTC at a Ham fest this fall. Owner said he got
> it off eBay. It was missing the controller box that had a switch & a pot to
> adjust the bps. This coil was made by Jeff Messer from JM labs. I have the
> manual & it has bits & pieces of the schematic, but not a complete
> schematic. The cord that plugs into the controller has a 1/8" mini plug with
> tip, ring and sleeve. Sleeve is grounded. I don't want to make the wrong
> connection & "let the smoke out".
>
>                Anyone have one of these coils, or know how to get in touch
> with Jeff Messer? Sure would like to get this thing going for Sunday to
> scare the ghosts & goblins. I have digital pictures available. Any ideas
> greatly appreciated. You can contact me off list at: rja12@xxxxxxxxxxx
>
>
> Thanks,
> bob
> n2oam
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla