[TCML] Re: Hot Primary

[Greg Leyh <lod@xxxxxxxxxxx>]

Oddly enough, an eddy current solver will show that the inside surface 
of the primary turn will have a higher current density than the outside 
surface.  If the primary was *inside* the secondary then the reverse 
would be true.  In addition, the current density will be somewhat higher 
towards the edges of the turn.   GL

Dr.Hankenstein wrote:

> I believe Greg's twin coils only have a one-turn primary; therefore
> heating of the inner turn would not be an issue, right?
>
> An absolutely astute blond observation by Hank


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla