[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] interesting spark gap idea



Finn Hammer wrote:
Norman Stepp skrev:
I had an idea the other day for a static gap that I have never seen before. I haven't been able to construct one and try it yet due to lack of time/funds. I did draw a pic of it though, http://i855.photobucket.com/albums/ab115/ndsteppii/SparkGap.jpg . Would this work? has it been done? Before I waste my time what do you think. I like the idea because it's something different. any and all criticism welcomed. Norm
Norm,
Nice symmetrical layout that will work well, no doubt. Instead of using your time on a manifold to split airstream into 2, you use 2 blowers. I like it. Has a racing engine feel to it.
You could call it the *RamHornGap*.




You might take a look at the pipe cap gap

http://home.earthlink.net/~jimlux/hv/captrig1.htm

 which itself is a variant of a Marx blast gap:
http://home.earthlink.net/~jimlux/hv/blastgap.htm

Steve Young on the list built a gap similar to the triggered one;
http://www.pupman.com/listarchives/2003/July/msg00126.html

Fruengel (Dr capacitor and spark gap) commented in his book that the radial air flow between the electrodes was beneficial, so in your "rams horn gap" (Finn has a great name for you!), if you put pipe caps on the ends of the pipes, with a hole drilled in it, you'll get a nice smoothly curved surface between the ends of the pipes.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla