[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] New Resonator - Ribbon Primary



Connecting to ribbon primary with "adapted" pin vises.  Holes drilled through the bottom polycarbonate disks.  Pin vises clamp onto the ribbon from below.

Each pin vise is soldered to 14 ga stranded HV wire in a way so that the copper strands contact the ribbon internally to the vise itself.

Have yet to energize.  Will do later this evening or tomorrow, when epoxy dries.

Joe

<http://img812.yfrog.com/gal.php?g=b9z.jpg>_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla