[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Re: Spark gap for NST coils



I have no idea.  I get them from my local Miller weld supply shop (Airgas).

DC




On Sat, Apr 24, 2010 at 6:00 PM, Derek Esq. <a_key_move@xxxxxxxxx> wrote:

> DC,
>
> Is there a web link on this?
>
> _________________
> If you are constructing a low to medium power Tesla coil, and require a
> quick and easy spark gap, then consider Miller Spark Gap Kit, used in
> Miller
> high freq welders.
>
> Contact you local large Miller welding supplier.  Ask for spark gap kit
> Miller p/n 852132, priced at $78.80.
>
> A 3 electrode holder kit with electrodes included to form 2 spark gaps. Use
> 2 kits for 4 gaps with 60 mA xmfrs and 1 kit with 2 gaps for 30 mA xmfrs.
>
> Blast with a 150 CFM blower for good performance.
>
> Dr. Resonance
>
>
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla