Re: [TCML] Ignition coil etc

["Paul Brodie" <pbbrodie@xxxxxxxxxxxxx>]

What else are you planning to put between the transformer and the coil??? I hope there is much more to this then what you have written.

Give more details and I think I can help you a great deal. I have a plethora of experience with ignition coils. You may want to contact me off list.
Paul Brodie
  ----- Original Message ----- 
  From: Rhys Sage 
  To: tesla@xxxxxxxxxx 
  Sent: Thursday, October 01, 2009 1:58 PM
  Subject: [TCML] Ignition coil etc


  I've just got myself a nice new ignition coil and a 16v AC 1000ma plugin transformer. Is there anything I should put between the coil and the transformer to protect either or both when I wire it up and plug it all into the wall? Is there liable to be a backlash from the coil when I unplug the transformer? Should I put a switch in between transformer and coil?

  I have no idea how high voltage the coil is. It's a new coil for a Mustang. Quite nice and small - made in China and no other markings on it. The box says MasterPro E70 and the UPC is 84126602575.

  I figure it's a lower voltage coil so a higher voltage input should be fine.



        
  _______________________________________________
  Tesla mailing list
  Tesla@xxxxxxxxxx
  http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla