[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] JAVATC - Question



It might do ok. The only way is to know is to try. What I do suggest regarding the gap distance is to ensure you set the gap up correctly by taking the gap and transformer aside and setting the gap up without anything else connected. This is the only way I know of to ensure the gap is set properly.

Take care,
Bart

otmaskin5@xxxxxxx wrote:
Thanks Bart.? I think I got it now.? I try playing with the variations as you suggest to get a feel for the differet size-geometry relationships.

One other question, you mentioned the drawer knobs tend to heat up and are tough to cool.? I will be using air blast for cooling & quenching.? I removed the motor/fan from a vac from an old vacuum cleaner which seems to put out a pretty intense airflow out of a 1" X 2" opening.? Do you think this would?be sufficient to?handle the cooling need?? I hear of a lot of guys using brass bar stock in these gaps which I would think have similar heat issues.?
Dennis
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla