[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] 7.5V 52A Filament Transformer for 3CX3000 Needed



I have a 5 volt 100 amp xfmr, insulated to 15kv, if I recall correctly.
Maybe one use a variac on the input to the voltage kicked up to 7.5v at 52 amps
out???
Jim Heagy (homerlea@xxxxxxx)

> Subj: Re: [TCML] 7.5V 52A Filament Transformer for 3CX3000 Needed
>  Date: 6/11/2009 3:09:59 PM Pacific Daylight Time
>  From: resonance@xxxxxxxxxxxx
>  Reply-to: tesla@xxxxxxxxxx
>  To: tesla@xxxxxxxxxx
>  Sent from the Internet
>
>
>
> If you can't find one, you can do what I did:  remove the outer HV winding
> on a 7.2 kV pole xmfr, 5 kVA, then wind on some #6 AWG wire to make your
> own.
>
> Experiment with 10 turns of finer wire to get the turns ratio right, then
> wind on the big wire.
>
> Dr. Resonance
>
>
>
>
>
> On Thu, Jun 11, 2009 at 7:45 AM, Cameron B. Prince <
> cplists@xxxxxxxxxxxxxxxxx> wrote:
>
> >Hey guys,
> >
> >Does anyone have a 7.5V 52A filament transformer they¹d be willing to
> part
> >with?
> >
> >We actually need two if available. Please contact me off-list.
> >
> >Thanks,
> >Cameron




**************
Download the AOL Classifieds Toolbar for local deals at your
fingertips.
(http://toolbar.aol.com/aolclassifieds/download.html?ncid=emlcntusdown00000004)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla