[TCML] Still stuck at 36"

["Bill Bohn" <b.jbohn@xxxxxxxxxxx>]

Seems that the spark gap is a major part of my problem.I pulled the ¾ copper
pipes out. I then cut 2 rings of pipe, cut a section out so they would fit
tight into

The pipe electrodes. Now they are .060 thick wall tubes. When I put them
into service the the result was amazing.The sputtering stopped and it had a
smooth

Buzzing tone.I also gained 2 more inches in spark.Would thicker electrodes
be even better? Say ¼? thick wall?I am hoping to reach 50? at the end of all
this.

Now I am getting 46?.I did install another transformer. I am now 7.5kv at
110ma in the tank.

Thanks again! 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla