[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] NST Measurements



Forgive me as I'm quite the rookie, but my multi-meter measures amperage in DC, thus would I have to rectify the NST output before measurement, and would a 800V 4A bridge rectifier be able to do the job if needed(or will it fry)? and what value would I obtain? The RMS current? I am, at the moment, quite confused as to whether the NST output is of sinusoidal waveform or of a sine squared output, since the secondary is centrally earthed.
 
jeremy> Date: Mon, 19 Jan 2009 07:44:43 -0800> From: dogbrain_39560@xxxxxxxxx> Subject: RE: [TCML] NST Measurements> To: tesla@xxxxxxxxxx> CC: > > --- On Mon, 1/19/09, Jeremy <jeremy_runescape@xxxxxxxxxxx> wrote:> > > From: Jeremy <jeremy_runescape@xxxxxxxxxxx>> > Subject: RE: [TCML] NST Measurements> > To: "TCML" <tesla@xxxxxxxxxx>> > Date: Monday, January 19, 2009, 12:20 AM> > measuring the output amperage is looking to> > be a pain. will a normal ammeter do the job or will the hV> > fry it's circuitry?> > Most ammeters have very low internal resistance. Therefore, it is reasonably safe to use them check the output current of an NST. The ammeter will present a near short-circuit to the NST. The NST will self-limit the current to no more than 30 or 60mA. Ohm's Law prevents the ammeter from feeling more than a few mV. I've tested many 30 & 60mA NSTs using a regular DMM set to the AC Amps function. Every NST has measured within 2mA of it's data plate rating.> > If you plan to try this, I suggest you connect the ammeter to the de-energized NST HV terminals securely, so the leads can't fall off. Use alligator clip test leads or something. Next, plug in the NST and observe your ammeter reading without touching or handling the meter or NST. Unplug the NST before disconnecting the ammeter.> > Never probe the bushings of an energized NST. The HV will arc to the probe tips as soon as they are in range, instantly ruining your ammeter! For testing purposes, unplug the NST to turn it off. Do not rely on any switch, breaker, or pull chain.> > Forgive me if I'm preaching the obvious, but we can't know who else might be reading along.> > Cheers,> > Greg> > > > _______________________________________________> Tesla mailing list> Tesla@xxxxxxxxxxxxxx> http://www.pupman.com/mailman/listinfo/tesla
_________________________________________________________________
More than messages–check out the rest of the Windows Live™.
http://www.microsoft.com/windows/windowslive/_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla