[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Check this out!



Andrew Robinson wrote:
So after reading the lasts few posts with Phil and Gary, I was about
to comment saying... "Why on earth are you using 100bps in a SRSG?"
and then it hit me two seconds later... DUH! 50Hz. Anywaz this got me
thinking, and eventually thumbing through some old files in order to
find these two wav files. Since they are .wav, they're kinda big but
save um and listen. One is a 50Hz tone, the second is a 60Hz tone.
Sometimes we get so caught up in the circuits, coils, and electricity
of it all, I think some of us forget about the beauty and
consistencies of physics and the laws of nature. Next time you're
drawing a 60Hz arc from a NST or firing up your SRSG, listen again to
these tones. Pretty cool!
http://host.teslamad.com/50hz.wav

http://host.teslamad.com/60hz.wav

I am able to switch from 120bps to 240bps with my rotary (using John Freau's controller). The best way I have been able to approximate the sound is with the shareware application, "NCH Tone Generator" set to either the square wave or the traingular wave.

It's kind of fussy to get the rotary into just the right spot for 240bps operation, but it helps a lot to be familiar with the exact tone when I am dialing it in.

Jon
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla