[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] Polyurethane Finish Questions



Hi Gary,

Let me reiterate since I made two disparate points. I was simply saying that
at High frequencies we really care what the coating is to avoid losses.
Formers become an issue of course. I guess what I am hoping is not likely to
be the case: I have seen several coils burn through from a streamer. They
were not coated well; but, at that voltage it may not make any difference?
What if the secondary was inside a polycarbonate or acrylic exterior form -
an extreme case in point.

Jim Mora

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Lau, Gary
Sent: Thursday, April 23, 2009 6:08 AM
To: Tesla Coil Mailing List
Subject: RE: [TCML] Polyurethane Finish Questions

Snip

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla