[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Inverter MO HV supply



Jim -
 
Could you provide the link to the Panasonic inverter schematic? I was not able to locate it on the FusorList.
 
Regards,
Herr zapp

--- On Sun, 4/12/09, Jim Mora <wavetuner@xxxxxxxxx> wrote:

From: Jim Mora <wavetuner@xxxxxxxxx>
Subject: [TCML] Inverter MO HV supply
To: "'Tesla Coil Mailing List'" <tesla@xxxxxxxxxx>
Date: Sunday, April 12, 2009, 5:03 PM

Hello Group,

 

Has anyone tried to use a Panasonic MO inverter supply with a SS gap such as
Terry's Piranha II ? This would be cool as it lowers the weight even more.
The supply has a 4kv, 1200w output out of the box via a doubler. There is a
link from Richard Hull's Fusor list to a shematic. Thanks goes out to David
Smith, VK3HZ, for scoping out the control signals of the supply. It turns
out to be a 220hz, TTL PWM to control the output power. There is a 555
schematic that works perfect for this.

 

David was trying to find a supply to drive a linear. This is a constant
current output which should be better for our needs. To get real power and
less ripple for multiple multiplier stages, two of these could share a
common output ground to drive a fullwave multiplier. Cool in concept for a
cap charger or a PS for Piranha II.

 

Be careful with these as every thing is hot until you get to the inverter
transformer output. 

 

I bought a working Panasonic MO for $15.00. Contact me off list or carry on
the thread if our esteemed moderators find this applicable.

 

Thanks Much,

Jim Mora

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla