[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] BIGPIG secondary dies...but may be resurected



> Since the current is less towards the top of the coil, the thinner wire
> "should" be able to handle it.

I've never understood this.  Why should current be less at the top of
the coil?  I understand that the voltage there is greater w.r.t ground
than it is near the bottom, but Shirley the current is the same
throughout the secondary.  After all, it's just a long piece of wire.

Yours unenlightenedly,
Henry
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla