Re: [TCML] Check the Discharge Time of my Bleed Res

["Henry Hallam" <hallam@xxxxxxx>]

>>>.  I bet the xmfr winding impedance, with center tap from each hot to
> ground, wil be equally effective is discharging all the
>>> caps at nearly the same rate.

For me, the purpose of bleeder resistors is to deal safely with the
situation where some part of the primary circuit becomes disconnected
during operation.  You can make your own judgment call on whether that
risk is worth mitigating.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla