[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Check the Discharge Time of my Bleed Res



Hey P Tuck...

what is the starting voltage?

Scot D


P Tuck wrote:

Hello.
I am about to bench test my new MMC Cap of 0.02143 uF (CD's using 2 strings
of 14 each) using a makeshift inductance.
Each individual cap' has a 10 Meg bleed res' across it and I work this out
as a discharge time of 10 sec's, to discharge to 1% of the supply voltage.
This in my case will be 100v when connected to a 10K supply.

Am I right on my timing?
Philip

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla