Re: [TCML] Pig SISG: Destroying the Indestructible

[FIFTYGUY@xxxxxxx]

In a message dated 3/25/08 7:56:19 P.M. Eastern Standard Time,  
bartb@xxxxxxxxxxxxxxxx writes:

>Very cool! Who knows maybe a marginal component caused the section  to 

>fry or maybe you are riding the fence! Probably riding the  fence.



I still think I'm riding the fence on peak  current through the SISG. The 
"best guess" seems to be pulses past 800A are  not good. 

>Have you any photos of your  board(s)?



    Not of the bad one. The boards are populated pretty  close to the 
"standard" setup explained on Mark Dunn's site.
 
    FWIW, I put together a little Web page with some  pics on it:
 
_http://members.aol.com/fiftyguy/highvoltage.html_ 
(http://members.aol.com/fiftyguy/highvoltage.html) 
 
    Not very useful for this crowd, but what the heck.  My setups are just 
ugly prototypes. But I think I've learned a lot more than if  I'd invested my 
limited free time in making works of art.
 
-Phil LaBudde
Center for the Advanced Study of Ballistic  Improbabilities



**************Create a Home Theater Like the Pros. Watch the video on AOL 
Home.      
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla